Homemade Fudge Mini-Series Blog 2 - Fudge Not Setting Properly (2024)

Homemade Fudge Mini-Series Blog 2 - Fudge Not Setting Properly (1)

We’ve all been there. You’re in the kitchen, following a Traditional Fudge Recipe step by step, measuring out all the ingredients as you go, doing everything the recipe tells you. You finish making your Fudge and you leave it to cool before you beat it with a wooden spoon, however, your Fudge is not setting like the recipe says it should.

What equipment do you need to make Homemade Fudge?

First of all, it’s important to understand that if you use the wrong equipment when making Homemade Fudge, it may impact the overall quality! To effectively make delicious Homemade Fudge, you’ll need:

1. A heavy-bottomed pot with high sides
2. A wooden spoon (we use silicon but it has to be able to withstand temperatures of up to 260 degrees Fahrenheit)
3. A parchment-lined baking tray
4. A sugar thermometer or a jug of cold water
5. Patience and lots of it!

Why has my Fudge not set?

The main reasonis that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That’s why we recommend investing in a sugar thermometer. Another reasonyour Fudgeis not settingis that the ratio of liquid to sugaris too high.

How long does it take Fudge to set?

It usually takes around 3 hours for Fudge to fully set. Therefore, if you have followeda traditional Fudge recipe correctly and boiled your Fudge to the optimum temperature, once you have beaten your Fudge it will take around 3 hours until it is fully set. When you are making Fudge, you must be patient!

What to do if your Fudge doesn’t set?

The good news is that you’ve probably made an amazing thick Fudge sauce! You could use your sauce to pour over ice cream or if you wanted it a little thinner, add some heavy cream and reheat the sauce until it has all melted through.

Homemade Fudge Mini-Series Blog 2 - Fudge Not Setting Properly (2)

We hope you enjoyed the second blog in our Homemade Fudge mini-series. Leave us a comment below, we’d love to hear from you!

Homemade Fudge Mini-Series Blog 2 - Fudge Not Setting Properly (2024)

FAQs

Homemade Fudge Mini-Series Blog 2 - Fudge Not Setting Properly? ›

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

Why is my fudge not setting enough? ›

Fudge Didn't Set

If your fudge turned out super sticky, or it didn't set as it cooled, it probably never got hot enough. This mistake is super easy to avoid if you use a candy thermometer and cook the fudge to the temperature specified in the recipe (usually between 234 and 239°F).

How to fix fudge that didn't harden? ›

OPTION 3) Sieve together some powdered sugar and cocoa powder, and gradually work this into your unset fudge until it reaches the consistency of dough, then roll out and cut into squares, or shape into balls and then roll in powdered sugar (roll the balls in icing sugar, not yourself).

What to do when fudge is too runny? ›

If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream. Stir the fudge as it heats, but only until the sugar in the chocolate is completely melted again.

Why won't my 3 ingredient condensed milk fudge set? ›

Why won't my 3 ingredient fudge set? This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool.

Should you stir fudge while it's boiling? ›

You should mix the cream, butter, and sugar when making your fudge, but put down the spoon once it has reached its boiling point. Stirring while your sugar mixture is boiling will only form sugar crystals and make your fudge crunchy rather than silky smooth.

Can I freeze fudge to make it set? ›

We like to set this fudge in the freezer to make it quicker! Once you add the fudge to your pan it will need just 30 minutes in the freezer to set.

How do you make homemade fudge firmer? ›

​Harden the fudge:​ Place your container or tins in the fridge for 2 hours, which is the time it takes for the fudge to set. Once it's hardened, cut the fudge into 12 pieces or remove it from the muffin tins. Store in the fridge or the freezer (if you don't devour it right away).

Can you over whisk fudge? ›

If you are using an electric whisk instead of hand beating your Homemade Fudge it's important to remember that this is a very easy way to overbeat Fudge. When Fudge is overbeaten it can also create a grainier texture on the tongue, so be extra careful when using electric equipment to beat your Homemade Fudge!

Why is my fudge drying out? ›

Fudge is best stored at room temperature for 2 to 3 weeks wrapped up in its original wax paper. NEVER REFRIGERATE your fudge as this will draw out the moisture and leave you with dry, crumbly fudge.

Why did my homemade fudge not harden? ›

Why has my Fudge not set? The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft.

What makes fudge firmer? ›

Cooking is necessary to dissolve sugar crystals and to evaporate part of the water in the cream. The length of this step has a direct impact on the firmness of the fudge.

What gives fudge its firm texture? ›

Tiny microcrystals in fudge are what give it its firm texture. The crystals are small enough, however, that they don't feel grainy on your tongue, but smooth. While you ultimately want crystals to form, it's important that they don't form too early.

How do you make fudge firmer? ›

​Harden the fudge:​ Place your container or tins in the fridge for 2 hours, which is the time it takes for the fudge to set. Once it's hardened, cut the fudge into 12 pieces or remove it from the muffin tins. Store in the fridge or the freezer (if you don't devour it right away).

How long does it take for fudge to fully harden? ›

Proper fudge will set after sitting at room temperature for about 4 hours.

How long does it take for fudge to fully set? ›

After the chocolate has mostly melted, stir in the vanilla extract. Continue to stir until the chocolate is completely melted and the mixture is smooth and shiny. Pour into a prepared 8 x 8 inch pan. Let the fudge set at room temperature (covered) for at least four hours.

How long does it take for fudge to thicken? ›

Beat the mixture until it just loses it's shine and becomes very thick (this should take about 5-10 minutes). The longer you beat once it starts to thicken then the more crumbly the final fudge will be. If you like it smooth - beat it only until comes away from the sides of the pan and sticks well to the spoon.

Top Articles
Latest Posts
Article information

Author: Jamar Nader

Last Updated:

Views: 5499

Rating: 4.4 / 5 (55 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Jamar Nader

Birthday: 1995-02-28

Address: Apt. 536 6162 Reichel Greens, Port Zackaryside, CT 22682-9804

Phone: +9958384818317

Job: IT Representative

Hobby: Scrapbooking, Hiking, Hunting, Kite flying, Blacksmithing, Video gaming, Foraging

Introduction: My name is Jamar Nader, I am a fine, shiny, colorful, bright, nice, perfect, curious person who loves writing and wants to share my knowledge and understanding with you.