May 10, 2021
![Homemade Fudge: 4 Common Mishaps and How to Avoid Them - Wockenfuss Candies (1) Homemade Fudge: 4 Common Mishaps and How to Avoid Them - Wockenfuss Candies (1)](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Hint: one of the best ways to avoid common mistakes in homemade fudge is to leave fudge making up to the experts at Wockenfuss Candies!
Homemade fudge is a creamy, delicious treat. Chocolate fudge is a standard favorite, and there are countless variations and flavor combinations that bring some excitement to the world of homemade fudge. Although some recipes seem relatively straightforward, many home cooks have trouble creating the perfect fudge from scratch. In this blog, we discuss some of the most common challenges people face when making homemade fudge. Of course, one of the best ways to avoid these missteps is to leave fudge making up to the experts at Wockenfuss Candies!
Homemade Fudge Doesn’t Always Set
Traditional fudge is made by heating sugar, butter, milk, and other ingredients until the mixture reaches the soft-ball stage. Home cooks usually use a metal saucepan to do the job, with the final hot mixture spread into a casserole dish or sheet pan to cool. However, homemade fudge doesn’t always set up into a semi-firm, melt-in-your-mouth confection. If your fudge doesn’t firm up after a few hours, you either have too high an amount of liquid to sugar, or your mixture hasn’t reached the soft-ball stage. Using a candy thermometer can help home cooks avoid this problem.
Cooking in High Humidity Can Cause Problems
Just as altitude can create complications when baking, high humidity in the kitchen can lead to significant setbacks when making fudge. Humidity can cause fudge to boil over in the pan or stay soft when set, so try to avoid working on humid days if at all possible. If waiting for a less humid day isn’t feasible, you’ll need to boil your fudge at a slightly higher temperature than usual — or just order some delicious fudge from Wockenfuss!
Why Homemade Fudge Becomes Grainy
Even if your homemade fudge sets up to a nice firm consistency when cooled, you can still run into texture problems. Fudge becomes grainy and sugary when prepared incorrectly. Unfortunately, this is a common issue. To avoid grainy fudge, make sure that the sugar in your mixture dissolves entirely. This can require adjustments to your recipe or stirring technique.
How to Avoid Burning Your Fudge
As with any other confectionery endeavor, burning your fudge is a distinct possibility. Use a heavy-bottomed saucepan (some folks swear by copper pots) and stir the mixture constantly. Never leave your fudge unattended, and make sure to scrape the side of the pan as you stir. It’s hard (if not impossible) to save a burnt batch of fudge. Still, stopping by your nearest Wockenfuss Candies store is a surefire way to save the day!
A Wide Selection of Delicious Treats from Wockenfuss Candies
Head to WockenfussCandies.com and browse our wide selection of chocolates and candies; we promise you won’t be disappointed! Wockenfuss Candies is one of the oldest candy makers in Baltimore. We opened our doors in 1915 and have proudly served the people of Baltimore ever since. If you have any questions about our wide selection of chocolates, please contact Wockenfuss Candies by calling 1-800-296-4414 or email info@Wockenfusscandies.com. When you’re not savoring our sweets, stay satisfied by following us on Facebook, Twitter, and Pinterest!
This entry was posted on Monday, May 10th, 2021 at 2:21 pm.You can skip to the end and leave a response. Pinging is currently not allowed.
FAQs
7 Common Mistakes to Avoid for Candy Shop-Worthy Fudge and Caramels
- Using the Wrong Pan. All candy and confections start by melting sugar. ...
- Stirring the Sugar. ...
- Not Using a Candy Thermometer. ...
- Leaving Out the Parchment Paper Lining. ...
- Skipping the Cooking Spray. ...
- Scraping the Pot. ...
- Using a Cold Knife to Slice.
What to not do when making fudge? ›
Valuable tips for successful fudge
- Don't stir during cooking. Fudge can be cooked on the stove or in the microwave. ...
- Avoid crystallization. During cooking, sugar crystals can stick to the sides of the pan. ...
- Let cool before beating. After being cooked, the sugar must crystallize again to create fudge. ...
- Beat the mixture.
What is the secret to good fudge? ›
Tips for Making Fudge
- Monitor the Temperature with a Candy Thermometer. If you end up with soft fudge that turns into a puddle in your hands or hard fudge that is a bit reminiscent of a crunchy candy, improper temperature is likely to blame. ...
- Avoid Stirring Once the Mixture Comes to a Simmer. ...
- Beat Thoroughly.
What is the secret to smooth fudge that is not gritty? ›
Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.
What happens if you over mix fudge? ›
Beating the cooled batter is one of the crucial steps of fudge-making, but overbeating can turn fudge hard as a rock. Pay close attention to the change in appearance and only beat the fudge until it loses its glossy sheen.
Why does my fudge come out like toffee? ›
If your fudge has a texture like soft toffee, it could be due to overcooking, using too much sugar or butter, or not cooking it to the right temperature.
Do you stir fudge when it's boiling? ›
Stir the ingredients to dissolve the sugar until the mixture comes to a boil. If your recipe uses milk, stirring will keep the mixture from curdling. But once it reaches about 236–238 degrees F/113–114 degrees C (the "soft-ball" stage), do not stir it or even shake the pan.
What does cream of tartar do to fudge? ›
Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!
What to do with failed fudge? ›
My advice to you is to just pour it in a jar, call it something else delicious, and pretend you meant for it to be that way. The nice thing about my “failed” fudge is that it tastes absolutely delicious! A spoonful of the delectable treat will make you want for more.
Why shouldn't you stir fudge after it reaches the correct temperature? ›
After cooking, the mixture must cool before being stirred in order to make it crystallize. This cooling period is essential: this is what determines the size of sugar crystals which, remember, should be as tiny as possible. Ideally, the syrup should cool to a temperature of around 43 to 50 °C (110 to 122 °F).
Use Evaporated Milk- Make sure to use evaporated milk and not sweetened condensed milk. If you accidentally use sweetened condensed milk your fudge will be incredibly over the top sweet. Cut up the Butter– Before adding the butter in make sure to cut it into smaller pieces for faster melting.
Why won't my 2 ingredient fudge set? ›
The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.
How to stop fudge from going grainy? ›
Don't panic if your fudge is grainy, nothing is lost it just requires some more work. Pop the grainy fudge back into the pan along with some water and a little cream and melt the fudge back down to a liquid and re-boil it to temperature.
Can I fix fudge that didn't set? ›
OPTION 3) Sieve together some powdered sugar and cocoa powder, and gradually work this into your unset fudge until it reaches the consistency of dough, then roll out and cut into squares, or shape into balls and then roll in powdered sugar (roll the balls in icing sugar, not yourself).
How to make fudge more solid? ›
How do you fix fudge that is too soft? Bring the fudge back to a boil with 1–2 US tbsp (15–30 ml) of cream. If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream.
Why would fudge not set up? ›
The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.
What happens if you boil fudge too long? ›
Too cooked
The result is hard and brittle fudge. To save the fudge, put it in a saucepan with 45 to 60 ml (3 or 4 tbsp.) of 35% cream and bring to a boil, stirring until the sugar is completely melted. Then let it boil without stirring until the thermometer reaches 114 to 115 °C (237 to 239 °F).
How can you tell if fudge is bad? ›
If fudge experiences a change in temperature, it can melt or develop a slimy texture on the surface. If it is exposed to air, it can dry out and become hard. Specific add-ins to fudge have the potential to grow mold or give off a bad odor, and at that point, the fudge should be avoided.