Fudge Problems? Learn How to Fix Them. (2024)

Fixing Soft or Grainy Fudge

By

Elizabeth LaBau

A professional pastry chef, cookbook author, and writer, Elizabeth LaBau has published more than 600 articles on baking and candy making.

Learn about The Spruce Eats'Editorial Process

Updated on 01/5/20

Trending Videos

Fudge Problems? Learn How to Fix Them. (2)

If you're having trouble with your fudge, you're probably following a recipe for old-fashioned fudge—candy cooked to a specific temperature, cooled, then beaten until thick. Old-fashioned fudge can be fussy, especially on your first or second attempt. Some home cooks complain that their fudge is grainy, crumbly, or burnt while others complain that their fudge never sets properly. If you've encountered one of these problems, don't worry—you can probably save your fudge.

None of the following solutions or tips applies to the so-called quick fudge that involves marshmallow fluff or condensed milk. In fact, if you're nervous about trying to make old-fashioned fudge again, you should start with one of those foolproof recipes.

Fixing Fudge

Sometimes old-fashioned fudge never sets, even after hours in the refrigerator. You wait patiently, only to discover that it's still a sticky, gummy mess. But don't despair or throw out the entire pan of fudge: You can probably remedy the situation.

Fudge usually behaves this way when it's not cooked to a high enough temperature (due to oversight or a faulty candy thermometer).

If your fudge is tough, hard, or grainy, then you may have made one of several mistakes: You may have overcooked it, beaten it too long, or neglected to cool it to the proper temperature. Don't throw out the whole pan, because you may be able to melt the fudge down and try again. Of course, if your fudge has a distinctly burnt or scorched flavor, you'll have to start over with a fresh batch.

To fix soft fudge or hard fudge, simply follow these easy steps:

  1. Scrape the fudge back into a large saucepan and add 1 1/2 cups of water.
  2. Stir the fudge over low heat until it dissolves. Carefully taste the mixture, as the water probably diluted the flavor. Add more flavorings if necessary.
  3. Increase the heat to medium and bring it to a boil, washing down the sides of the pan frequently with a wet pastry brush to prevent sugar crystals from forming. Do not stir the fudge.
  4. Cook it to the proper temperature specified in the recipe (most likely between 237 F and 239 F).
  5. Take it off the heat, and follow the recipe's instructions for cooling and beatingthe fudge. As you beat the candy, remember that the mixture should lose its sheen and thicken before you pour it into the pan.

Tips for Fudge Makers

  • Before you make another batch of fudge, it's a good idea to test your candy thermometer. Place it in boiling water to make sure that it registers 212F. If it doesn't, you should calibrate it or invest in a new one. Many people overcook fudge because of faulty or broken thermometers.
  • Once the sugar has dissolved and the mixture has come to a boil, do not stir it. If you do, the sugar can crystallize, giving your fudge a gritty texture.
  • As you beat the fudge, pay attention to color and texture. Once the fudge loses its sheen and thickens, put down your spoon. If you continue to beat the fudge, it will go from “perfect” to “rock hard” in minutes.
  • If you're making a lighter fudge that doesn't involve any chocolate, you might notice that the recooked batch has a darker, brownish color, thanks to caramelized sugar crystals. This change may alarm you, but the fudge should still have a lovely, mellow flavor and silky texture.
Fudge Problems? Learn How to Fix Them. (2024)

FAQs

How do you know when fudge is beaten enough? ›

After letting the fudge cool, it's time to beat it. It is important to stir constantly with a wooden spoon until the mixture starts to thicken and its surface starts to look dull or matte. Now is the time to stop beating and pour the fudge into a mould.

How do you fix failed fudge? ›

To fix oily, hard or grainy fudge, scoop the fudge back into a pot with about a cup of water. Cook it over low heat until the fudge dissolves. Then bring the fudge back up to the temperature specified in the recipe and follow the remaining steps. The flavor may be slightly diluted, but the texture will be improved.

Was fudge made by mistake? ›

That appetite for fudge dates back more than a century. Food historian Joyce White says fudge is based on a recipe for chocolate caramels, which was very similar. "What probably happened is that there was someone in Baltimore, messed it up, or 'fadged' it," she said. "Fadge is a word that means you messed up.

Why hasn't my fudge set properly? ›

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

How to know when fudge is done? ›

Remove the ball from the water and check its consistency with your fingers. For perfect fudge, the syrup should form a soft ball that can be picked up, but easily flattened. If the syrup is undercooked, drops of syrup will sink to the bottom of the glass in threads or simply dissolve.

How to make fudge creamy and not grainy? ›

Once the sugar has dissolved and the mixture has come to a boil, do not stir it. If you do, the sugar can crystallize, giving your fudge a gritty texture. As you beat the fudge, pay attention to color and texture. Once the fudge loses its sheen and thickens, put down your spoon.

How long does it take to beat fudge? ›

Using a wooden spoon, beat the fudge vigorously until it thickens and begins to lose its gloss. This may take anywhere from 5 to 15 minutes. While beating by hand is the traditional method, you can use an electric mixer if you have one.

Why won't my 3 ingredient condensed milk fudge set? ›

Why won't my 3 ingredient fudge set? This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool.

How to fix fudge that is like toffee? ›

Simply scrape the fudge back into a saucepan and add 1.5 cups of water. Place it over low heat and stir until the fudge has dissolved and is blended with the water. Increase the heat to medium and bring it to a boil, washing down the sides of the pan frequently with a wet pastry brush to prevent sugar crystals.

Why did my fudge turn out like caramel? ›

Fudge can turn into caramel due to overcooking or undercooking, incorrect temperatures, or wrong ingredients.

Do you set fudge in the fridge? ›

The ratio of chocolate to condensed milk needs to be just right, otherwise you might end up with fudge that is too soft or too hard. Do not freeze the fudge to set it. Best way is to just be patient for a couple hours and set it in the fridge. If your fudge hasn't set, then you've gone wrong somewhere else.

Can you fix fudge that didn't harden? ›

OPTION 3) Sieve together some powdered sugar and cocoa powder, and gradually work this into your unset fudge until it reaches the consistency of dough, then roll out and cut into squares, or shape into balls and then roll in powdered sugar (roll the balls in icing sugar, not yourself).

What to do with failed fudge? ›

Good use of failed fudge: fudge that is too hard, too soft, too runny, too sugary, too chewy, etc. Proportions are as follows: for every 2 cups (roughly 1 pound yield) of any failed fudge that is not runny, you'll need 1 egg, ½ cup all-purpose flour, and ½ cup milk. If fudge is soupy, halve the milk (to ¼ cup).

Can I freeze fudge to make it set? ›

We like to set this fudge in the freezer to make it quicker! Once you add the fudge to your pan it will need just 30 minutes in the freezer to set.

What should fudge look like after beating? ›

The fudge is then beaten as this makes the fudge slightly crumbly rather than chewy. Beating the mixture encourages the formation of small sugar crystals, which leads to the crumbly texture. The crystals may not be noticeable in themselves but the fudge mixture will thicken and turn from shiny to matte in appearance.

When to stop beating fudge? ›

Once the mixture has cooled enough, use a wooden spoon or an electric hand mixer to beat the fudge until you see the very first signs of the mixture shifting from glossy to matte. Believe yourself when you think you see them! If you over-mix the fudge it will set in your pot.

Can you over whisk fudge? ›

If you are using an electric whisk instead of hand beating your Homemade Fudge it's important to remember that this is a very easy way to overbeat Fudge. When Fudge is overbeaten it can also create a grainier texture on the tongue, so be extra careful when using electric equipment to beat your Homemade Fudge!

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Errol Quitzon

Last Updated:

Views: 5467

Rating: 4.9 / 5 (79 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Errol Quitzon

Birthday: 1993-04-02

Address: 70604 Haley Lane, Port Weldonside, TN 99233-0942

Phone: +9665282866296

Job: Product Retail Agent

Hobby: Computer programming, Horseback riding, Hooping, Dance, Ice skating, Backpacking, Rafting

Introduction: My name is Errol Quitzon, I am a fair, cute, fancy, clean, attractive, sparkling, kind person who loves writing and wants to share my knowledge and understanding with you.